耐化學POM S9243

耐化學POM S9243---POM copolymer, modified

Injection molding type, elastomer-containing; with higher impact

strength and slightly lower hardness, rigidity and chemical

resistance than the basic type HOSTAFORM C 9021

Reduced emission grade, Emission according to VDA 275 < 5 mg/kg

good weld strength.

Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness)

POM共聚物，改性

注塑型，含彈性體；影響更大

強度和略低的硬度、硬度和化學性質(zhì)

電阻比基本型HOSTAFORM C 9021高

降低排放等級，根據(jù)VDA 275排放100 到 120°C
干燥時間3.0 到 4.0hr
建議的 大水分含量0.15%
料斗溫度20.0 到 30.0°C
料筒后部溫度170 到 180°C
料筒中部溫度180 到 190°C
料筒前部溫度190 到 200°C
射嘴溫度190 到 200°C
加工（熔體）溫度190 到 200°C
模具溫度60.0 到 80.0°C
注塑壓力60.0 到 120MPa
注射速度慢到中等